It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.
Code: SENS

Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.
Code: VAT

By the VHZ optional the blade speed rotation can be changed acting on the proper keys.
Code: VHZ

Unloading side connection between machine and roller table.
Code: RRS

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CREC

The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CRES

Articulated striker. The machine can be equipped of a length stop with a measure shaft from 1 to 6 meters specific for the RE1G-RE2G roller tables.
Code: FM..RSE