OPTIONAL BANDSAW MACHINES AUTOMATIC

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX - Olimpus

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

We recommend using this optional for strip cutting. Take special care when strip cutting round bars as the round bar could accidentally slip, thus breaking the sawband teeth.
Code: MV-AV

We recommend using this optional for strip cutting. Take special care when strip cutting round bars as the round bar could accidentally slip, thus breaking the sawband teeth.
Code: MV-AVD

We recommend using this optional for strip cutting. Take special care when strip cutting round bars as the round bar could accidentally slip, thus breaking the sawband teeth.
Code: MV-PEG

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).
Code: RPM2

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).
Code: RPM2 PEG

The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.
Code: TI

Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.
Code: VAT

The swarf extractor evacuates the swarf from inside the machine basement.
Code: ST