OPTIONAL BANDSAW MACHINES SEMIAUTOMATIC

Special jaws 430 mm height for bundle cut.
Code: GTP

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX - Olimpus

On machine Olimpus 1 it is available a second vice for material clamping in unloading side. This solution allows the material clamping on both sides of the blade and the trimming of the end of the material.
Code: M2

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

Additional unloading side surface to cut heavy material.
Code: PUSO

A milled roller placed on the loading side for the material feeding in manual mode. Lifting system with lever and eccentric, tough hand wheel for the rotation and gear box to make the material feeding easier.
Code: RRTR

The RTR optional allows to move the material to be cut manually in a safe and easy way. By means of an eccentric lever, the material rises from the basement, even when very heavy, and with the help from a manual hand wheel the piece to be cut can be moved forward and backwards.
Code: RTR

This option allows the sawing machine to cut round material whit a diameter up to 540 mm
(21.3 inch.). When using this optional, it is necessary to replace the blade protection guard positioned in the upper part, between the motor flywheel and the neutral flywheel (NB the special guard is equipped with the optional SHO).
Code: SHO

The optional TP vertical pusher, fitted above the saw vice, is used to ensure a better grip on the material to be cut. The device is particularly useful for bundle cutting.
Code: TP

Code: TO