ROLLER-TABLES BANDSAW MACHINES MANUAL

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

Roller table-machine connection on loading side.
Code: CRC

Articulated striker. The machine may be equipped with a length stop for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RP roller tables.
Code: FM..RS

Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=1000mm, minimal height h=910mm.
Code: RP1G-RP2G

Unloading side connection between machine and roller table.
Code: RRS

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CREC

The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CRES

Articulated striker. The machine can be equipped of a length stop with a measure shaft from 1 to 6 meters specific for the RE1G-RE2G roller tables.
Code: FM..RSE