ROLLER-TABLES BANDSAW MACHINES MANUAL

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

Unloading side connection between machine and roller table.
Code: RRS

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato

The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CRES

Articulated striker. The machine can be equipped of a length stop with a measure shaft from 1 to 6 meters specific for the RE1G-RE2G roller tables.
Code: FM..RSE

Idle roller table available in 1 meter long units. Each module presents 3 rollers, Load capacity=260Kg/m; ROller width=400mm; h min= 940mm/h max=1030mm.
Code: RE1G-RE2G

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables (only for Phoenix).
Code: CRECP

Digital measure reading system with manual striker positioning including idle roller tables RE2G + RE1G + connections CRES and RRS (H min= 910mm / H max= 1000mm).
Code: RMN

Digital measure reading system, with manual positionning of the strike, without roller tables.
Code: SMN