-
Semiautomatic band saw for cutting insulated (sandwich) and wire netting panels.
-
Head structure in 3 parts: special aluminium alloy, steel and cast iron.
-
Dynamometric blade tensioning.
-
Broken blade micro.
-
Head feeding system with hydraulic cylinder and front flow valve for feeding regulation and cutting optimizing.
-
Head drop on square column and double linear guides with U shaped guide in the front side.
-
Blade guide with combined action of side bearings, carbide plates and top bearing.
-
Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
-
Connection of the motor wheel to a flange with two conical bearings.
-
VHZ electronic blade speed regulation for a wide range of blade speed selection.
-
N° 4 vertical pneumatic cylinders for material locking.
-
Possibility to choose locking pressure.
-
Ergonomic working table and control panel.
-
Heavy duty basement.
-
Sheet metal construction in different thickness, holding sides and chips pan.
-
Hydraulic unit for the head cylinder power supply.
-
NB1 standard device which allows to effect the material cut through a soft lubrication of the blade cutting edge.
-
Electrical cabinet with 24VDC auxiliary tension, lockable main switch and electric drives.
-
The interface between the operator and the machine is a control panel divided in a part containinig the pneumatic/hydraulic controls and the other part containing the electrical controls.
-
The pneumatic/hydraulic part allows to manage the opening/closing of the vices, to adjust the curring pressure and the head drop speed.
-
The electric part contains the cycle start button, the head/vices moving controls, the potentiometer for the blade rotation speed setting, the selectors for the use of lubrication and of the option of the cutting area lighting, as well as the warning lights and the Emergency stop button.
-
Total protection against highest voltage and short circuit current. Protection level IP 55.
-
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/1Ph-220V/60Hz/3Ph-440V/60Hz/3Ph available).
-
Machine colours: yellow RAL 1018 and grey RAL 7036.