Description

Semiautomatic/Automatic band saw machine to cut at 0°. Head structure in 3 parts: special aluminium alloy, steel and cast iron. Heavy duty basement with sheet metal construction in different thickness. 700mm long connected to the basement roller table to support material on loading side .

Hydraulic unit for the head, the vice and the carriage feeding cylinders’ power supply. Balanced valve regulating the head descent hydraulic cylinder. Dynamometric blade tensioning, broken blade micro and blade rotation sensor. Gear box with parallel axes, and gears with grinded, inclined, cemented teeth lubricated with long lasting oil . Blade speed regulation with frequency variator (inverter) VHZ 16÷120 m/min Robust blade guide housing so structured: vertical staggered bearings for a first straightening, 2+2 carbide plates (19,5x19,5 mm) of containement and a bearing placed on the back of the blade to contrast the cutting stress (this considerably increases the duration of the blade compared to a creeping contrast). These characteristics allow a very high vertical precision in cutting.  Material clamping vice with manual positioning equipped with hydraulic cylinder.  Workpiece clamping on both sides of the blade. Cutting vice plate and carriage vice equipped with replaceable hardened pins to protect the material supporting surface. Ergonomic work top and control panel. Measuring system with positioning stop through a trapezoidal screw and a double micro system for the carriage vice slowing-down and stopping (tolerance ± 0,2 mm). Material feeding by carriage vice (sliding on chromed columns ø 60 mm) equipped with hydraulic cylinder and self-centering device  for not straight bars. Sliding on chromate columns, feeding stroke of 510 mm (1005 mm for C 1000 version) Material lacking micro placed on the carriage vice. 45 mm cutting final scrap. Digital control panel to check all machine functions, cutting cycle programs and auto diagnostic function. It’s possible to memorize the inserted cutting programs. The band saw is equipped with  CN, in order to allow to cut  a bar in different lengths and quantities.Blade cleaning brush driven by motor gearbox. Chips holding system and integrated coolant tank.

Electric pump for cooling both the blade guides and additional nozzle to cool the cutting area. Electrical cabinet with 24VAC, lockable main switch. Total protection against highest voltage and short circuit current. Protection level IP 55.

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7036.

Technical Characteristics
mm m/1' HP KW
3300x27x0,9 16÷120 2,0 1,5
   
KG axbxc m mm mm
1100 2,3x1,9x1,7 850 110x270
 
HP KW HP KW
0,10
0,08
1,5
1,1
HP KW HP KW
-
-
0,17
0,13


Cutting capacity
mm mm mm mm
260
260
260x270
-


 
FMB s.r.l. VAT Num. 01348550169 - Via Lodi, 7 - 24044 Dalmine (BG) ITALY - info@fmb.it