Automatic band saw machine for cutting at 0°.

Head structure in steel heavy carpentry.

Device for fast blade approach to the material to be cut.

Head drop on square column and double linear guides.

Hydraulic blade tensioning.

Blade length 4900x41x1,3 mm.

Broken blade micro and blade rotation tester.

Head feeding system with hydraulic cylinder and front balanced valve for approach setting in frontal position with double adjustment to optimize the cut.

Motorized blade cleaning brush driven by motor gearbox. 

Blade guide with combined action of side bearings, carbide plates and top bearing. 

VHZ electronical blade speed regulation for a wide range of blade speed selection.

Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.

Material clamping vice with hydraulic positioning and locking cylinder.

Piece clamping from both blade sides.

Cutting vice plate and carriage vice equipped with replaceable hardened plugs to protect the material supporting surface.

Ergonomic working table and control panel.

Roller table placed on the basement for material support on loading side and independent from the feeding sliding vice system.

Carriage vice for material feeding equipped with hydraulic cylinder and self-centric device for not straight bars.

Sliding on chromate columns, feeding stroke of 420 mm.

160 mm cutting final scrap.

Measuring system with positioning draught through a trapezoidal screw and a double micro system for the carriage vice slowing-down and stopping (tolerance ± 0,2 mm).

Heavy duty basement with sheet metal construction in different thickness, chips holding system and integrated coolant tank.

Electric pump for cooling both blade guides.

Motorized chain chip conveyor.

Hydraulic unit for the head, the vice and the carriage feeding cylinders’ power supply.

Electrical cabinet with 24VAC, main switch.

Digital control panel to check all machine functions, cutting cycles programs and auto diagnostic function.

Total protection against highest voltage and short circuit current. Protection level IP 55. 

Electrical cabinet with 24VAC, lockable main switch and safety unit. 

Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph available).

Machine colours: yellow RAL 1018 and grey RAL 7036.