Semiautomatic band saw machine to cut from 0° to 60° right, 0° to 45° left, with facing cuts up to 60° to the left. Head structure in 3 parts: special aluminium alloy, steel and cast iron. Head feed system with hydraulic cylinder and descent speed controlled by a flow control valve mounted at the front. Dynamometric blade tension device. Broken blade endswitch. DTI “Interrupted cutting device” mounted as standard equipment. Reduction gearbox with case-hardened, ground, helical gears lubricated with long-life grease. VHZ electronic speed variator 16÷120 m/min. Connection of the motor drive wheel to a flange assembly with paired tapered roller bearings. Blade cleaning brush powered by gear motor. Adjustable blade guide with carbide inserts and guide bearings. Manual positioning material cast iron vice with fast rack system and hydraulic locking cylinder. Wide hardened replaceable plates for long-lasting material support surface. Vice sliding from right to left on linear guides with locking positioner. Ergonomic working table and control panel. Head rotation with mechanical stops at 0°, 45° and 60° both right and left with digital cutting angle display. Loading side roller table mounted on the machine base, with two rollers for material support, sliding on linear guides to ensure proper support during angled cuts. Heavy-duty welded steel base with panels of differentiated thickness. 80-litre coolant tank with electric pump for blade guide lubrication and cooling. Hydraulic unit integrated in the machine base for controlling the head and vice cylinders. Electrical cabinet with 24VDC auxiliary voltage, operator controls, and lockable main switch. Full protection against overvoltage and short circuits. Protection level IP 55. Push-button control panel for all machine movements, equipped with alarm diagnostics. Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph - 230V/50Hz/3Ph - 220V/60Hz/3Ph - 440V/60Hz/3Ph available). Machine colours: yellow RAL 1018 and grey RAL 7016.