LOGIN DOWNLOAD AREA

Hercules+CN

Home / Bandsaw machines Automatic / Hercules+CN / Standard equipment
Modello segatrice Athena 34A Athena 41A - Athena 41A I Hercules+CN Jupiter+CN Pegasus+CN Zeus+CN
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
C3-Roller support
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide - max load 750 kg. H min 685 mm / H max 870 mm

Code: C3 - Cavalletto
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX
MT-A-teleassistance module
With the option MT-A, teleassistance module, the machine can be connected to the internet in order to receive technical support from remote or through cooperation online.

Code: MT-A
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
RFP2 A - Roller table
2 m long roller table  and max load 1000 Kg/m (h min 725 mm / h max 780 mm).

Code: RFP2 A
RPM2 - Vice pressure adjustment
This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).

Code: RPM2
ST-PEG
The swarf extractor evacuates the swarf from inside the machine basement.

Code: ST
TI - Hydraulic stretcher
The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.

Code: TI
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE