LOGIN DOWNLOAD AREA

Pegasus+G

Home / Bandsaw machines Manual / Pegasus+G / Standard equipment
Modello segatrice Antares Junior+G Mercury+G Orion Phoenix Saturn+G Senior+G Titan+G Triton
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
C3-Roller support
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide - max load 750 kg. H min 685 mm / H max 870 mm

Code: C3 - Cavalletto
CRS-PEG
Unloading side connection between the basement of the bandsaw and the RFP2 roller table.

Code: CRS-PEG
FM..RSP - Heavy length stops
The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.

Code: FM..RSP
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX - Olimpus
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
RAC-Compressed air cooler
Option for the blade cooling during dry cuts. This is useful for the materials which could be damaged if in contact with lubricating oil. Need of compressed air connection for functioning. 

Code: RAC
RFP2 A - Roller table
2 m long roller table  and max load 1000 Kg/m (h min 725 mm / h max 780 mm).

Code: RFP2 A
RM - Motorized roller
Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato
VAT - Cutting angle display
Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.

Code: VAT
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE