ROLLER-TABLES ORION

Home / Bandsaw machines Manual / Orion / Roller-tables
C2 - Frame

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.

Code: C2 Layout
CREC -Loading side connection

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.

Code: CREC Layout
CRES - Connection in unloading side

The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.

Code: CRES Layout
FM..RSE - Length stop

Articulated striker. The machine can be equipped of a length stop with a measure shaft from 1 to 6 meters specific for the RE1G-RE2G roller tables.

Code: FM..RSE 160
RE1G-RE2G - Roller tables

Idle roller table available in 1 meter long units. Each module presents 3 rollers, Load capacity=260Kg/m; ROller width=400mm; h min= 940mm/h max=1030mm.

Code: RE1G-RE2G Layout
RM - Motorized roller

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato Layout
RMN

Digital measure reading system with manual striker positioning including idle roller tables RE2G + RE1G + connections CRES and RRS (H min= 910mm / H max= 1000mm).

Code: RMN 286
RRS - Unloading side pull-out roller surface

Unloading side connection between machine and roller table.

Code: RRS Layout
SMN

Digital measure reading system, with manual positionning of the strike, without roller tables.

Code: SMN 314