-
Semiautomatic band saw machine to cut from 0° to 60°.
-
Head structure in three parts: special aluminium alloy, steel and cast iron.
-
Reduction gearbox with inclined grinded case hardened teeth lubricated with long lasting grease.
-
VHZ electronical blade speed control, 16÷120 m/min.
-
Connection of the motor wheel to a flange with two conical bearings.
-
Head feeding system with hydraulic cylinder and descent adjustment by single-turn flow valve placed in front position. Dynamometric blade tensioning.
-
Blade guide with combined action of side bearings, carbide plates and top bearing. Blade cleaning idle brush easy to be adjusted and handy.
-
Material clamping cast iron vice with manual positioning, equipped with hydraulic locking cylinder.
-
Working top and control panel placed in the most ergonomic position.
-
Head rotation with stops at 0°, 45° and 60°, graduated scale for angle measure reading and strong locking lever.
-
Material feeding roller on loading side with a resistant double position support.
-
Strong millimetres length stop for measuring the cutting length 0÷600 mm.
-
Heavy-duty machine basement made with different thickness metal sheets and chips holding sides.
-
Front door with key locking.
-
30-liters capacity coolant tank and electric pump for both blade-guides cooling.
-
Hydraulic unit controlling the head cylinder and the vice cylinder movements.
-
Electric cabinet with 24VAC-auxiliary voltage, lockable main switch and operator drives.
-
Total protection against highest voltage and short circuit current. Protection level IP 55.
-
Push buttons control panel to carry out all machine movements and detect possible alarms. Line voltage: 400V/50Hz/3Ph standard (Also available 230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/3Ph- 440V/60Hz/3Ph).
-
Machine colours: yellow RAL 1018 and grey RAL 7036.