DOTM-Vertical vice
Description


Code: DOTM
Device for vertical clamping of the material, hydraulic cylinder and manual positioning. During the cutting cycle the vertical cylinder works together with the vice for the material clamping.
LX-Laser lighting for cutting line
Description


Code: LX
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
NB1-One nozzle sprayer
Description


Code:
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), the use of the NB optional is particularly suggested.

koeb bicalutamid

go read read
RPM1-Vice pressure adjustment
Description


Code: RPM1
The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.
SENS-Control blade rotation
Description


Code: SENS
The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.
VAT PQB-Cutting angle display pqb
Description


Code: VAT PQB
This optional allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plateas the one on the standard machines this was not possible. It also allows a good view of reading in low light.
 
FMB s.r.l. VAT Num. 01348550169 - Via Lodi, 7 - 24044 Dalmine (BG) ITALY - info@fmb.it