-
Automatic band saw machine to cut at 0°.
-
Head structure in 3 parts: special aluminium alloy, steel and cast iron.
-
Sensor for recognition of the head starting position.
-
Heavy duty basement with places for the lifting with forklift.
-
700 mm long connected to the basement roller table to support material on loading side.
-
Improved protection barrieres with easy access on the posterior side for blade change or other operations.
-
Hydraulic unit for the head, the vice and the carriage feeding cylinders’ power supply.
-
Balanced valve regulating the head descent hydraulic cylinder.
-
Dynamometric blade tensioning, broken blade micro and blade rotation sensor.
-
Gear box with parallel axes, and gears with grinded, inclined, cemented teeth lubricated with long lasting oil.
-
Blade speed regulation with frequency variator (inverter) VHZ 16÷120 m/min.
-
Electrical cabinet, head descent regulation valve and cleaning gun in frontal ergonomic position.
-
Robust blade guide housing so structured: vertical staggered bearings for a first straightening, 2+2 carbide plates (19,5x19,5 mm) of containement and a bearing placed on the back of the blade to contrast the cutting stress (this considerably increases the duration of the blade compared to a creeping contrast).
-
These characteristics allow a very high vertical precision in cutting.
-
Material clamping vice with manual positioning equipped with hydraulic cylinder.
-
Workpiece clamping on both sides of the blade.
-
Cutting vice plate and carriage vice equipped with replaceable hardened pins to protect the material supporting surface.
-
Ergonomic work top and control panel.
-
Measuring system with positioning stop through a trapezoidal screw and a double micro system for the carriage vice slowing-down and stopping (tolerance ± 0,2 mm).
-
Material feeding by carriage vice (sliding on chromed columns ø 60 mm) equipped with hydraulic cylinder and self-centering device for not straight bars.
-
Sliding on chromate columns, feeding stroke of 510 mm. Material lacking micro placed on the carriage vice.
-
45 mm cutting final scrap.
-
Digital control panel to check all machine functions, cutting cycle programs and auto diagnostic function.
-
It’s possible to memorize the inserted cutting programs.
-
The band saw is equipped with CN, in order to allow to cut a bar in different lengths and quantities.Blade cleaning brush driven by motor gearbox.
-
Chips holding system and integrated coolant tank.
-
Electric pump for cooling both the blade guides and additional nozzle to cool the cutting area.
-
Electrical cabinet with 24VAC, lockable main switch.
-
Total protection against highest voltage and short circuit current.Protection level IP 55.
-
Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph available).
-
Machine colours: yellow RAL 1018 and grey RAL 7036.