LOGIN DOWNLOAD AREA

Major

Home / Bandsaw machines Semiautomatic / Major / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
ACP- Cycle start with pedal
With this option the cutting cycle start can be executed using a pedal.

Code: ACP
C2 - Frame
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.

Code: C2
CRC - Loading side connection
Roller table-machine connection on loading side.

Code: CRC
CRS - Connection in unloading side
The unloading side connection between machine and roller table.

Code: CRS
DOTM - Vertical vice
Device for vertical clamping of the material, hydraulic cylinder and manual positioning. During the cutting cycle the vertical cylinder works together with the vice for the material clamping.

Code: DOTM
FM..RI - Length stop with hydraulic articulated striker
Length stop on unloading side with hydraulic cylinder for the backing of the stroke reference during the cut. Available lengths  from 1 m to 6 m.

Code: FM..RI
FM..RS - Length stop
Articulated striker. The machine may be equipped with a length stop for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RP roller tables.

Code: FM..RS
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX
MT - Blade tension reading cylinder with pressure gauge
Blade tension reading cylinder with pressure gauge

Code: MT H27
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
PAT 0° - Additional surface
Additional supporting plate for the cut at 0°, useful in case of cut of short pieces.

Code: PAT 0°
QEL SMART- Console control panel
With this option QEL SMART the operator can put the control panel in the position He prefers, the connection cable is 2,5m long.

Code: QEL SMART
RCN
Digital measure reading system with automatic striker positioning including idle roller tables RP2G + RP1G + connections CRS and RRS (H min=910mm/H max= 1000mm).

Code: RCN
RM - Motorized roller
Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato
RMN
Digital measure reading system with manual striker positioning including idle roller tables RE2G + RE1G + connections CRES and RRS (H min= 910mm / H max= 1000mm).

Code: RMN
RP1G-RP2G - Roller tables
Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=1000mm, minimal height h=910mm.

Code: RP1G-RP2G
RPM1 - Vice pressure adjustment
The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.

Code: RPM1
RRS - Unloading side pull-out roller surface
Unloading side connection between machine and roller table.

Code: RRS
SCN
Digital measure readingg system with automatic positioning of the strike, without roller tables.

Code: SCN
SENS - Control blade rotation
The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.

Code: SENS
SMN
Digital measure reading system, with manual positionning of the strike, without roller tables.

Code: SMN
SR D - Roller support
Roller for the material support with diameter = 50mm. Cut at max 40°, excludes the standard measuring rod

Code: SR D
TM - Mechanical fast approach
This option allows a considerable reduction in working times: it speeds up the descent of the blade and decreases its lifting speed. On the head there is a fast approach device allowing the rapid approach of the blade when this is near the work piece to be cut. After cutting, the blade goes back only what is strictly necessary out of the piece and it is immediately ready for the next cut.

Code: TM
VAT - Cutting angle display
Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.

Code: VAT
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE