LOGIN DOWNLOAD AREA

Lunar

Home / Bandsaw machines Semiautomatic / Lunar / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Lunar Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
C2 - Frame
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.

Code: C2
CREC -Loading side connection
The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.

Code: CREC
CRES - Connection in unloading side
The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.

Code: CRES
KIT M-Device for manual cutting
The kit M is used when the user sets the machine in manual cycle and not in semiautomatic cycle.

Code: KIT M
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX
MT - Blade tension reading cylinder with pressure gauge
Blade tension reading cylinder with pressure gauge

Code: MT H27
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
PAT 0° - Additional surface
Additional supporting plate for the cut at 0°, useful in case of cut of short pieces.

Code: PAT 0°
QEL SMART- Console control panel
With this option QEL SMART the operator can put the control panel in the position He prefers, the connection cable is 2,5m long.

Code: QEL SMART
RE1G-RE2G - Roller tables
Idle roller table available in 1 meter long units. Each module presents 3 rollers, Load capacity=260Kg/m; ROller width=400mm; h min= 940mm/h max=1030mm.

Code: RE1G-RE2G
RPM1 - Vice pressure adjustment
The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.

Code: RPM1
RRS - Unloading side pull-out roller surface
Unloading side connection between machine and roller table.

Code: RRS
SENS - Control blade rotation
The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.

Code: SENS
TM - Mechanical fast approach
This option allows a considerable reduction in working times: it speeds up the descent of the blade and decreases its lifting speed. On the head there is a fast approach device allowing the rapid approach of the blade when this is near the work piece to be cut. After cutting, the blade goes back only what is strictly necessary out of the piece and it is immediately ready for the next cut.

Code: TM
sertraline side effects alcohol sertraline and alcohol consumption click VAT-Cutting angle display Olimpus
This optional allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate as the one on the standard machines this was not possible. It also allows a good view of reading in low light.

Code: VAT OLIMPUS
VHZ - Electronic inverter
By the VHZ optional the blade speed rotation can be changed acting on the proper keys.

Code: VHZ
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE