LOGIN DOWNLOAD AREA

Olimpus 1 XL

Home / Bandsaw machines Semiautomatic / Olimpus 1 XL / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
C3-Roller support
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide - max load 750 kg. H min 685 mm / H max 870 mm

Code: C3 - Cavalletto
GTP - Vice jaws for bundle cut
Special jaws 430 mm height for bundle cut.

Code: GTP
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX - Olimpus
M2 - Double vice
On machine Olimpus 1 it is available a second vice for material clamping in unloading side. This solution allows the material clamping on both sides of the blade and the trimming of the end of the material.

Code: M2
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
PISO - Special Olimpus loading side support
Additional loading side surface to cut heavy material.

Code: PISO
PUSO - Special unloading side support
Additional unloading side surface to cut heavy material.

Code: PUSO
RFOL XL
2 meters long rollertable with free 1100 mm wide rollers and loading capacity of 2000 Kg/m. Min. heighth=655mm, max. height h=710mm

Code: RFOL XL
RM - Motorized roller
Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato
RRTR - Drive rollerwith reduction gear box
A milled roller placed on the loading side for the material feeding in manual mode. Lifting system with lever and eccentric, tough hand wheel for the rotation and gear box to make the material feeding easier.

Code: RRTR
RTR - Eccentric drive roller
The RTR optional allows to move the material to be cut manually in a safe and easy way. By means of an eccentric lever, the material rises from the basement, even when very heavy, and with the help from a manual hand wheel the piece to be cut can be moved forward and backwards.

Code: RTR
SHO - Cutting capacity
This option allows the sawing machine to cut round material whit a diameter up to 540 mm
(21.3 inch.). When using this optional, it is necessary to replace the blade protection guard positioned in the upper part, between the motor flywheel and the neutral flywheel (NB the special guard is equipped with the optional SHO).

Code: SHO
ST Screw
Screw chips conveyor.

Code: ST Coclea
TO - Feeler


Code: TO
TP - Cylinder for vertical clamping
The optional TP vertical pusher, fitted above the saw vice, is used to ensure a better grip on the material to be cut. The device is particularly useful for bundle cutting.

Code: TP
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE