LOGIN DOWNLOAD AREA

Solar

Home / Bandsaw machines Semiautomatic / Solar / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
ACP- Cycle start with pedal
With this option the cutting cycle start can be executed using a pedal.

Code: ACP
C2 - Frame
It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.

Code: C2
DMS-Double vice
The machine is equipped with two vices: one before the blade and one after the blade.In this way, both pieces of the bar are locked.

Code: DMS
FM..RSP - Heavy length stops
The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.

Code: FM..RSP
GTP S - Special jaws for bundle cutting (0° cut only)
Special jaws for the bundle cutting for the Solar bandsaw. This option allows only the 0° cutting.

Code: GTP S
LX - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX - Olimpus
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
RFP1 S
Roller table 1 meter long, capacity of 1000kg/m, rollers 550mm wide, h min: 1015mm / h max: 1115mm.

Code: RFP1 S
RFP2 S
Rulliera folle dotata di 6 rulli con larghezza di 550mm disponibile in moduli di lunghezza di 2m. Capacità di carico di 1000Kg/m; h min. 1040mm, h max. 1095mm.

Code: RFP2 S
RPM1 - Vice pressure adjustment
The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.

Code: RPM1
RPM2 - Vice pressure adjustment
This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).

Code: RPM2
RTR/IS - Solar drive roller - Loading side
The optional RTR/IS allows the manual manipulation of the material on the loading side.

Code: RTR/IS
RTR/US - Solar drive roller - Unloading side
The optional RTR/US allows the manual manipulation of the material on the unloading side.

Code: RTR/US
TI - Solar
The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.

Code: TI-Solar
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE