C2 - Frame

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

CRC - Loading side connection

Roller table-machine connection on loading side.
Code: CRC

LX - Laser lighting for cutting line

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

NB1 - One nozzle sprayer

The band saw machine can be equipped of a blade and cutting cooling device, to improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls).
Code: NB1

NB1 Box-NB2 Box - Sprayer for blade lubrification

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

V - Blade rotation speed variator

The V speed variator allows to constantly range the rotation blade speed from 20 to 100 m /1’ so giving the opportunity to choose the most suitable speed without causing any problem to the blade motor.
Code: V

VAT - Cutting angle display

Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.
Code: VAT

VHZ - Electronic inverter

By the VHZ optional the blade speed rotation can be changed acting on the proper keys.
Code: VHZ

CRS - Connection in unloading side

The unloading side connection between machine and roller table.

Code: CRS

FM..RSP - Heavy length stops

The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.
Code: FM..RSP

Cerchi una segatrice specifica per il taglio di materiali speciali?
Contattaci, il personale del nostro staff ti risponderà nel più breve tempo possibile.