ROLLER-TABLES BANDSAW MACHINES SEMIAUTOMATIC

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

Roller table-machine connection on loading side.
Code: CRC

With automatic striker positioning.
System equipped with a measuring striker with automatic positioning controlled by a  programmable electronic panel. Feeding is made by a pinion on rack through a gear box controlled by an inverter. Tilting striker arm equipped with a locking brake  with springs shocks absorber. 550 mm wide idle rollers, diameter 70 mm and max loading capacity of 1000 Kg/m. 
H min 925 mm/H max 980 mm.
Code: CNP

The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.
Code: FM..RSP

Length stop on unloading side with hydraulic cylinder for the backing of the stroke reference during the cut. Available lengths  from 1 m to 6 m.
Code: FM..RI

Articulated striker. The machine may be equipped with a length stop for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RP roller tables.
Code: FM..RS

2 m long roller table with idle rollers 550mm wide, max load 1000 Kg/m (h min 925 mm/h max 980 mm). Also available with PVC-covered rollers.
Code: RFP2 - RFP2 PVC

RFPL two-meters long roller table with 1300 mm wide idle rollers and capacity of 500 Kg/m. Min. height h=870mm , max height h=930mm.
Code: RFPL2 - RFPL2 PVC

Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=1000mm, minimal height h=910mm. Also available with PVC-covered rollers.
Code: RP1G-RP2G-RP1G PVC-RP2G PVC