C2 - Frame

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

CRC - Loading side connection

Roller table-machine connection on loading side.
Code: CRC

NB1 Box-NB2 Box - Sprayer for blade lubrification

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

V - Blade rotation speed variator

The V speed variator allows to constantly range the rotation blade speed from 20 to 100 m /1’ so giving the opportunity to choose the most suitable speed without causing any problem to the blade motor.
Code: V

VAT - Cutting angle display

Allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plate placed the standard machines, this is not possible. It also allows a good view of reading in low light.
Code: VAT

CRS - Connection in unloading side

The unloading side connection between machine and roller table.

Code: CRS

FM..RS - Length stop

Articulated striker. The machine may be equipped with a length stop for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RP roller tables.
Code: FM..RS

RP1G-RP2G - Roller tables

Roller table available in units 1 meter long each with idle rollers 400 mm wide and loading capacity of 300 Kg/m. Maximum height h=1000mm, minimal height h=910mm.
Code: RP1G-RP2G

RRS - Unloading side pull-out roller surface

Unloading side connection between machine and roller table.
Code: RRS

KIT PN - Pneumatic vice clamping

With the PN optional the workpiece lock and unlock are made by a pneumatic vice. A pneumatic circuit controls the needed compressed air (max 6 bar). You can read the working pressure on the pressure gauge.
Code: KIT PN

Cerchi una segatrice specifica per il taglio di materiali speciali?
Contattaci, il personale del nostro staff ti risponderà nel più breve tempo possibile.