ROLLER-TABLES BANDSAW MACHINES SEMIAUTOMATIC

Home / Roller-tables Bandsaw machines Semiautomatic
C2 - Frame

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

CNP - Digital measuring reading system

With automatic striker positioning.
System equipped with a measuring striker with automatic positioning controlled by a  programmable electronic panel. Feeding is made by a pinion on rack through a gear box controlled by an inverter. Tilting striker arm equipped with a locking brake  with springs shocks absorber. 550 mm wide idle rollers, diameter 70 mm and max loading capacity of 1000 Kg/m. 
H min 925 mm/H max 980 mm.

Code: CNP

FM..RSP - Heavy length stops

The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.
Code: FM..RSP

RFP2 - Roller table

2 m long roller table with idle rollers 550mm wide, max load 1000 Kg/m (h min 925 mm/h max 980 mm).
Code: RFP2

RM - Motorized roller

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato

RM PEG - Pegasus motorized roller table

Material handling on both directions (backward - forward) thanks to the all motorized rollers. Bearing structure (cross members and legs) made with electro welded steel profiles, built in a single module, complete of side and head closures in modular screwed sheet panels.
Code: RM PEG

CRS-PEG DS

Unloading side connection between the basement of the Pegasus DS+VHZ and the RFP2 roller table.
Code: CRS-PEG DS

Cerchi una segatrice specifica per il taglio di materiali speciali?
Contattaci, il personale del nostro staff ti risponderà nel più breve tempo possibile.