ROLLER-TABLES BANDSAW MACHINES SEMIAUTOMATIC

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

With automatic striker positioning.
System equipped with a measuring striker with automatic positioning controlled by a  programmable electronic panel. Feeding is made by a pinion on rack through a gear box controlled by an inverter. Tilting striker arm equipped with a locking brake  with springs shocks absorber. 550 mm wide idle rollers, diameter 70 mm and max loading capacity of 1000 Kg/m. 
H min 925 mm/H max 980 mm.
Code: CNP

The machine may be equipped with a measure shaft for 1 to 6 meters (3.3 to 19.7 ft) measure stops to be installed on the RFP roller tables.
Code: FM..RSP

Unloading side connection between the basement of the bandsaw and the RFP2 roller table.
Code: CRS-PEG

Roller table available in 2 meter long modules. Load capacity=1000Kg/m, rollers width=700mm. Min h=925mm, h max=980mm. 
Code: RFP2 XL

Roller table 1 meter long, capacity of 1000kg/m, rollers 700mm wide, h min: 925mm / h max: 980mm.
Code: RFP1 XL