OPTIONAL BANDSAW MACHINES SEMIAUTOMATIC

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX - Olimpus

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

The closing pressure adjustment of the vice RPM1,decreasing from the standard machine max. pressure, is used for materials having thin thickness and consequently that can be easily deformed. It is not possible to reduce the pressure value adjusted by the hydraulic system pressure switch under the safety value of 6 bar.
Code: RPM1

This optional allows you to adjust the pressure of the clamping of the cutter vice and the carriage vice. Adjustment must be made separately for each vice and is done by hand, using the handwheel of the valve. The pressure gauge lets you read the pressure change (in bar).
Code: RPM2

The option Ti allows carrying out the blade tensioning always correctly and when the machine is off, it allows the blade to loosen avoiding a useless static work. A micro switch controls that the blade is tensioned and, in case of the blade breaking, it stops all the other machine movements.
Code: TI-Solar

The machine is equipped with two vices: one before the blade and one after the blade.In this way, both pieces of the bar are locked.
Code: DMS

Special jaws for the bundle cutting for the Solar bandsaw. This option allows only the 0° cutting.


Code: GTP S

The optional RTR/IS allows the manual manipulation of the material on the loading side.
Code: RTR/IS

The optional RTR/US allows the manual manipulation of the material on the unloading side.
Code: RTR/US

With this option the cutting cycle start can be executed using a pedal.
Code: ACP