GTP - Vice jaws for bundle cut

Special jaws 430 mm height for bundle cut.
Code: GTP

LX - Laser lighting for cutting line

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

M2G - Double vice (degrees cutting)

On machine Olimpus 2 it is possible to have a second vice for material clamping on unloading side for degree cutting 0°÷45°. This solution allows the material clamping on both sides of the blade and the trimming of the end of the material.
Code: M2G

MAO2-MAO3 - Cutting angle motorization

MAO2:  Olimpus 2+VHZ cutting angle motorization.
MAO3: Olimpus 3+VHZ cutting angle motorization.

Code: MAO2-MAO3

NB1 Box-NB2 Box - Sprayer for blade lubrification

The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.
Code: NB1 Box-NB2 Box

QEL - Console control panel

In the pulpit control panel version, the control panel may be placed according to the production necessities of the Costumer.
Code: QEL

PUSO - Special unloading side support

Additional unloading side surface to cut heavy material.
Code: PUSO

RRTR - Drive rollerwith reduction gear box

A milled roller placed on the loading side for the material feeding in manual mode. Lifting system with lever and eccentric, tough hand wheel for the rotation and gear box to make the material feeding easier.
Code: RRTR

RTR - Eccentric drive roller

The RTR optional allows to move the material to be cut manually in a safe and easy way. By means of an eccentric lever, the material rises from the basement, even when very heavy, and with the help from a manual hand wheel the piece to be cut can be moved forward and backwards.
Code: RTR

SD - Stress detector

The “SD –stress detector” optional surveys this stress from the motor ampere increase. Before the situation gets critical, the SD slightly lifts the blade from the material and then makes it get down for a no trouble cutting. During all these phases the blade keeps turning. The lapse of time of blade lifting is chosen by the Customer.
Code: SD

Cerchi una segatrice specifica per il taglio di materiali speciali?
Contattaci, il personale del nostro staff ti risponderà nel più breve tempo possibile.