C2 - Frame

It’s a bar bearing support equipped with a roller. It can be used in addition to the roller table. It should be suitably ballasted or fixed to the floor. Roller 550 mm wide, max load 750 Kg, H min 840 mm / H max 1.015 mm.
Code: C2

LX - Laser lighting for cutting line

The option LX facilitates the operator during the cutting phase: a luminous red line (laser light) is projected on the piece locked in the vice to exactly display where the blade will make the cut.
Code: LX

NB1 - One nozzle sprayer

The band saw machine can be equipped of a blade and cutting cooling device, to improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls).
Code: NB1

SENS - Control blade rotation

The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.
Code: SENS

VAT PQB - Cutting angle display

This optional allows to read, by means of a digital display, the cutting angle with an accuracy to tenths of a degree. With the graduated plateas the one on the standard machines this was not possible. It also allows a good view of reading in low light.
Code: VAT PQB

VHZ - Electronic inverter

By the VHZ optional the blade speed rotation can be changed acting on the proper keys.
Code: VHZ

RRS - Unloading side pull-out roller surface

Unloading side connection between machine and roller table.
Code: RRS

RM - Motorized roller

Our motorized roller can be joined to all models of FMB band saws so that any movement is avoided during the cut. Its moving is electrical and its lifting power is 1.500 Kg.

Code: RM - Rullo motorizzato

CREC -Loading side connection

The loading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CREC

CRES - Connection in unloading side

The unloading side connection between machine and roller table specific for RE1G–RE2G roller tables.
Code: CRES

Cerchi una segatrice specifica per il taglio di materiali speciali?
Contattaci, il personale del nostro staff ti risponderà nel più breve tempo possibile.