LOGIN DOWNLOAD AREA

Pluton Air

Home / Bandsaw machines Semiautomatic / Pluton Air / Standard equipment
Modello segatrice Calipso Centauro Galactic Hercules Hercules Tubes Major Mercury Olimpus 1 Olimpus 1 XL Olimpus 2 Olimpus 2 XL Omega Pegasus Pegasus DS Pegasus XL Pluton Air Saturn Sirius Solar
Documentazione disponibile Download machine layout
Fotogallery
Dotazioni di serie
ACP- Cycle start with pedal
With this option the cutting cycle start can be executed using a pedal.

Code: ACP
LX PLUTON AIR - Laser lighting for cutting line
The option LX facilitates the operator during the cutting phase: a luminous red line is projected on the piece locked in the vice to exactly display where the blade will make the cut.

Code: LX PLUTON AIR
NB1 Box-NB2 Box - Sprayer for blade lubrification
The band saw machine can be equipped of a blade and cutting cooling device. To improve the cutting quality and reduce pollution risk, moreover to avoid the risk of pools of cooling liquid on the floor (possible cause of accidental falls), we suggest to use the NB optional.

Code: NB1 Box-NB2 Box
PIAP - Predisposition of the suction system assembly
Specific for Pluton Air. At about 270 mm from the work top, over the pushers, it is placed a suction hood of processing fumes. The output is arranged for connection of 2 nozzles where apply the vacuum cleaner (not supplied).

Code: PIAP
QEL SMART- Console control panel
With this option QEL SMART the operator can put the control panel in the position He prefers, the connection cable is 2,5m long.

Code: QEL SMART
RFPL2 - 2 m Roller table
RFPL two-meters long roller table with 1300 mm wide idle rollers and capacity of 500 Kg/m. Min. height h=870mm , max height h=930mm.

Code: RFPL2
RPP - Pneumatic roller for Pluton Air
To facilitate the handling and the loading of very long pieces it has been created the optional RPP (specifically for Pluton Air).
On the loading side of the band saw machine it is placed an idle roller moving pneumatically . During loading of the material to be cut, when vices are open, the roller lifts up facilitating the pieces sliding. When vices close, the roller lowers. At the end of the cut the roller automatically lifts up to facilitate the subsequent load.

Code: RPP
SENS - Control blade rotation
The SENS optional is assembled on the flywheel. In case the blade collapses due to an insufficient tension exerted by the stretcher or in case it goes stuck into the piece during the cut, the work cycle would immediately stop. In this way the SENS optional protects the motor wheel and the blade itself.

Code: SENS
Looking for a specific bandsaw for special materials?
Contact us, our staff will answer you as soon as possible.
CLICK HERE